
Amp and effect modeling, on-device tone capture, native NAM support with TONE3000 built in, vocal processing and a 16-in/16-out audio interface, all controlled from a 10-inch touchscreen as responsive as a phone.
Hong Kong, November 20, 2026 – XRecer today announced XR1, a floor multi-effects processor that brings amp and effect modeling, on device tone capture, native Neural Amp Modeler (NAM) support and a 16-in/16-out USB audio interface together in one unit. Pre-orders open on November 20 at 8:00 p.m. PT.
XR1 is made for every musician. Guitarists, bassists, singers, producers and engineers can use it in the rehearsal room, in the studio and on stage. An octa-core processor running at up to 2.4 GHz, backed by a quad-core GPU and a dedicated NPU, gives XR1 the power to run up to four Signal Chains in parallel. Each chain has its own input and output, so XR1 can process more than one instrument at a time.
At the heart of XR1 are two ways to model amps and drive pedals. Parametric models are neural models trained on the original equipment. Advance models are white-box models that rebuild the original circuit component by component. Firmware 1.0 uses both methods to deliver 50 amps and 31 drives. Add 13 cabinets with two movable virtual microphones each, 21 modulation effects, 16 delays, 14 reverbs, 11 dynamics processors and a full set of wah, pitch, EQ and filter effects, and XR1 has 187 amps, cabinets and effects built in. It also comes with hundreds of captures preloaded, ready to play out of the box.
XR1 can also learn the sound of your own gear. The whole capture process happens on the unit: connect an amp or pedal, set the levels on screen, and XR1 trains the capture itself, using either XRecer's own CapX technology or NAM. When training is done, you can compare the capture with the real device before you save it.
XR1 supports NAM natively, so NAM models load directly, with no conversion. XRecer has also partnered with TONE3000, the online platform where players share their tones, to build it right into XR1. Owners get free access to a massive library of NAM captures and IRs, and using it feels as smooth and intuitive as a phone app: scan a QR code with your phone to sign in, browse over Wi-Fi, download a tone, and you're playing it a few taps later.
XR1 is ready to play about 15 seconds after power-on, and its 10-inch touchscreen is extremely responsive. Tapping, dragging and swiping feel the way they do on a phone, and every sound is built and edited by touch. On stage, the 12 footswitches take over. Eight of them are assignable and work across two pages, which puts 16 Presets, 16 Scenes or 16 Stomps at your feet. Live View shows what each footswitch does, and in Mod View you assign an effect by dragging it onto a footswitch.
Key features of XR1 include:
● 187 amps, cabinets and effects in firmware 1.0, including 50 amps and 31 drives, modeled with Parametric (neural) and Advance (circuit level) methods
● Hundreds of captures preloaded
● On-device capture of amps and pedals, trained with CapX or NAM, with no computer needed
● Native NAM support, with free access to the TONE3000 library built in
● IR Loader with import of third-party IR files (.wav)
● 1,600 slots each for Presets, CapX captures, NAM models and IRs
● Up to four parallel Signal Chains, each with its own input, output and noise gate, with splits and merges
● Ready to play about 15 seconds after power-on
● Highly responsive 10-inch touchscreen
● 12 footswitches, with 16 Presets, 16 Scenes or 16 Stomps across two pages
● Drag-and-drop Stomp assignment in Mod View, and Combo mode for using two footswitch modes at once
● Built-in Looper with overdub, half speed, loop doubling and quantize, plus eight Loop File slots
● Five-band Global EQ for adapting your sound to a room or monitor system without changing your Presets
● Two effects loops for placing external pedals anywhere in a Signal Chain
● Up to 12 MIDI messages per footswitch for controlling external gear
● 16-in/16-out USB-C audio interface with MIDI
● Wi-Fi (2.4 and 5 GHz)
● Full vocal processing and about 50 more amps and effects with firmware 1.1, available the day XR1 ships
XR1's rear panel has the connections to replace a whole rig. Four 1/4-inch instrument inputs let you connect several instruments at once or pair them for stereo sources, and their input impedance is adjustable from 10 kΩ to 10 MΩ to suit different pickups. The XLR microphone input has +48 V phantom power and up to 55 dB of preamp gain, so it works with both condenser and dynamic microphones. For outputs, there is a balanced 1/4-inch pair and a balanced XLR pair, so you can feed a stage amp and the mixing desk at the same time. A separate XLR microphone output sends vocals to the desk on their own channel. Two effects loops bring your existing pedals into the Signal Chain. There is also a 500 mW headphone output, two expression pedal inputs, an AUX input and 5-pin MIDI In and Out/Thru. All of this is housed in a CNC aluminum enclosure that measures 351 × 266 × 84 mm (13.8 × 10.5 × 3.3 in) and weighs 3.5 kg (7.7 lb).
Connect the USB-C port and XR1 becomes a 16-in/16-out audio interface. You can record your dry signal alongside the processed sound and re-amp any part later, and backing tracks from your computer play through XR1's outputs with no extra setup. With THD+N of 0.0005%, dynamic range of up to 123 dB and a signal-to-noise ratio of 116 dB, its audio performance is in the same class as professional studio interfaces.
Firmware 1.1 – Full Vocal Processing from the Day XR1 Ships
Firmware 1.1 will be released on the day XR1 begins shipping, so every XR1 owner has it from the start. It adds XR1's full vocal processing feature set, along with about 50 more amps and effects, bringing the total to more than 230. Vocals use the XLR microphone input and have their own XLR microphone output, so the processed vocal reaches the mixing desk separately from the instruments. XR1 will keep growing through firmware updates, and a guitar synth is in development.
Pricing and Availability
XR1 is priced at US$1,399. Pre-orders open November 20, 2026, at 8:00 p.m. PT at xrecer.com and through XRecer's authorized dealer network. The first batch is limited and ships in early December 2026, with a second batch following in January 2027.
To learn more, visit xrecer.com.
Explore the TONE3000 library at https://www.tone3000.com.













