NORTH HOLLYWOOD, CA, December 1, 2019 –Fryette Amplificationintroduces several new amplification products!
First, the Deliverance 60 Series II and the Deliverance 120 Series II, the long-awaited evolution of one of Fryette Amplification’s most popular amplifiers!
New for 2019, the Deliverance Series IIoffers a Solo Volume mode and a totally transparent, super low noise effects loop, both of which can be controlled using a remote footswitch. In addition, the More Mode toggle switch (that activates an additional tube gain stage) can now be assignable to the Solo Volume mode for additional tube gain boost on the fly. The newly added Bright toggle switch function can also be set to operate manually, assigned to the More mode or activated together with Solo mode using the footswitch.
The Deliverance preamp section has a broad dynamic range which accounts for its extra touch-sensitivity and excellent guitar volume control response. In addition, clean and overdriven voicing’s can easily be dialed up using the unique GAIN I / GAIN II structure with a little icing via the highly effective Presence and Depth controls. From there, just working your guitar volume and tone controls will yield a surprising range of voicings.
The Deliverance power amp section utilizes two KT88 (Deliverance60) or four KT88 (Deliverance 120)power tubes for robust low mids and sparkling high end harmonics. It is designed for big round tone and dynamic response at low to medium guitar volumes and a rapid but smooth transition into saturation, turning rich and thick at full guitar volume. This combination of preamp voicing and power amp response makes the Deliverance amplifier an ideal partner for any instrument, from a vintage Tele to a fully blown 7-string metal axe.
Specially designed, precision wound power and output transformers produce optimum performance, reliability and stability, delivering excellent power tube response and just the right amount of natural output transformer saturation and compression. Whether you prefer the pavement pounding torque of the Deliverance One-Twenty or the chunky authority of the Deliverance Sixty, you'll be rewarded with an unbelievable array of tonal options that belie their simple front panel control set.
Front Panel: Input, Gain I, Gain II, Bright Switch More/Less Switch, Master Volume, Solo Volume, Treble, Middle Bass, Presence and Depth.
Rear Panel: Ground Switch, AC Input, Mains Fuse, DC Fuse, Dual Parallel Speaker Output Jacks Impedance Selector.
Features: Dual gain controls, Foot switchable Solo Mode, MORE/LESS selectable gain switch, Interactive tone controls, Presence and Depth controls,KT88 Power Tubes, Precision-wound custom transformers.
Power output: 60 Watts RMS Impedance: 4, 8 or 16 ohms. Tube Complement:
1-12AX7A Tung-Sol (Russia)
3-12AX7AC (China Selected)
1-12AT7C (China Selected)
2-Premium Matched Electro Harmonix KT88 Power Tubes
Actual Dimensions: 29.25 X 9.5 X 10.5 (74 X 24 X 27) Actual Weight: 40 (18) Shipping Dimensions: 35X 15 X 19 (89 X 38 X 48) Shipping Weight: 50 (23) Recommended cabinet: Deliverance D412-P50E, Deliverance D212-P50E.
Front Panel: Input, Gain I, Gain II, Footswitchable Solo Mode, More/Less Switch, Bright Switch, Master Volume, Solo Volume, Treble, Middle Bass, Presence and Depth.
Rear Panel: AC Input, Mains Fuse, DC Fuse, Dual Parallel Speaker Output Jacks Impedance Selector.
Features: Dual gain controls, MORE/LESS selectable gain switch, Interactive tone controls, Presence and Depth controls, KT88 Power Tubes, Precision-wound custom transformers.
Power output: 120 WattsRMS
Impedance: 4, 8 or 16 ohms.
1-12AX7A Tung-Sol (Russia)
3-12AX7AC (China Selected)
1-12AT7C (China Selected)
4-Premium Matched Sovtek KT88 Power Tubes
Actual Dimensions: 29.25 X 9.5 X 10.5 (74 X 24 X 27)
Second, Fryette Amplificationintroduces the Power Station® 100,Dual-Mode Reactance Amplifier/Tube Amp Attenuator; A unique tube amp attenuator and tube amplifierbuilt into one portable unit.
The Fryette Power Station® 100 Dual-Mode Reactance Tube Amplifier is an easy to use Power Attenuator for controlling the volume of high-powered tube amplifiers with none of the drawbacks of a conventional attenuator. The PS-100 features two sets of remote foot-switchable front panel Volume, Presence and Depth controls for maximum live performance flexibility, and a powerful Dual KT88 100W Mono-Blockfor unparalleled punch and dynamic range.
If you have ever used a traditional Power Attenuator, you have already experienced the loss of tone and dynamics of your amplifier at various volume settings, and the frustration with the rotary level switch that always seems one step too loud or one step too quiet.
The Power Station® not only solves all of those problems, but also provides you with more sonic options in one convenient package:
•Preserves tube amplifier tone at any volume setting down to whisper level.
•Preserves and enhances the dynamic feel and speaker response at any volume.
•Two sets of remote foot-switchable Volume, Presence and Depth controls for maximum live performance versatility.
•Post-distortion Foot-Switchable Effects Loop provides a 100% analog signal path.
•Balanced XLR and Unbalanced 1/4” Adjustable Line Outputs for direct recording or live performance signal processing.
•True Impedance Matching, including 2/4, 8 or 16 ohms for both the amplifier and cabinet to optimize sonic performance while preventing damage to your amplifier.
•Remote bypass function using the Power Station Remote accessory (sold separately).
•Completely safe for any tube amplifier.
A Powerful Re-Amping Tool
As a re-amper, the Power Station® breathes new life and utility into your favoritegear. Now any small amp, preamp or modeler can cut a live gig with a full band.
•Crank a mini amp to the threshold of destruction, then adjust the Power Station to preserve the original tone or create an entirely new identity for it.
•Perfect as mono power amplifier for guitar preamps, floor preamps and modeling preamps.
•Ideal as an effects power amp for a Wet/Dry amp rig or a monitor power amp for live modeling direct to FOH.
•Great as a desktop power amp for adding tube power to direct recordings for any instrument or signal source.
•Protect your delicate vintage mics by keeping speaker cabinet volume low in the studio.
•No A/D/A conversion, therefore NO latency. Silent Mode The Silent Mode feature provides a versatile reactive load for silent recording using low or high-powered tube amplifiers.
The Power Station® 100 provides a variety of performing and recording solutions for every kind of playing or performing application/environmentand breathesnew life and functionality into any amp large or small.
•Output: 100W of pure tube power @ 4, 8 and16 ohms.
•Load Amp Impedance: 2/4, 8 or 16 Ohms, selectable
•Can drive a 2 Ohm speaker load, using the 2/4 Ohm setting.
•Active safety bypass feature disables internal power amp and maintains critical load on your amplifier if speaker output jack is accidently unplugged.
•Front panel controls: A/B Select switch, Hi/Lo Input Level switch,High frequency response switch - Flat, Brite, Edge, Low frequency response switch - Flat, Warm, Deep, Volume, Presence and Depth controls, Bypass (standby) switch, Power switch.
•Rear panel features: Amp In, Amplifier Impedance select – 2/4, 8 or 16 Ohms, Balanced Line Out XLR with LevelControl, Unbalanced 1/4” Line Out, FX Send, FX Return, FX Level Switch, Unbalanced 1/4” Line In, Speaker Impedance select 2/4, 8 or 16 Ohms, Speaker Out, Remote Footswitch jack, Ground Lift, Mains Fuse, AC Input.
•Carry bag and rack kits are available and sold separately
• Dimensions: 14” (35.5) W x 2.75” (7) H x 9” (22.8) D;
•Weight: 16 Lbs (7.3kg)
Fryette Power Station Demo Video:
USA Street price: $899.00
Finally, FryetteAmplificationintroducestheLXII, the world’s first single-space all-tube 50W/channel stereo power amplifier!
The Fryette LX II Tube Stereo Power Amplifier has toured nationally with Chris Traynor (Bush), Pete Anderson (Dwight Yoakam), Stephen Carpenter and Chino Moreno (Deftones), Roy Lozano (PowerFlo) and others during the artist-only beta release phase. Now this amazing amplifier is available worldwide!
With Fryette Power Amplifiers, it’s all about the feel. Once you hear a modeling amplifier with a real tube power amp pushing the speakers you’ll instantly understand why a digital signal path can’t duplicate the complex relationship between a power tube and the speakers. The LXII’s default linear response mode provides a full-range, flat-response signal from your amp to your speaker cabinet. Engaging the front panel PRESENCE and DEPTH buttons activate user-adjustable sonic enhancements that bring the color and life to your tone that you would expect from a Fryette power amp. In addition, the PRESENCE and DEPTH controls can be activated remotely using the rear panel control jack which can also be driven from the control out function found on most modeling devices and midi controllers. Now you can hear and feel what that model is supposed to sound like!
Built on decades of experience producing the finest all-tube power amps available,the Fryette LX II is the world’s first one-rack-space all-tube 50-watt per channel power amp. It beautifully accentuates the inherent qualities of any preamp or modeling device and dynamically responds to your playing technique, the way a great guitar amp should.
The Fryette LX II represents the ultimate evolution of classic tube amplifier design with a Patented transformer technology that allows it to fit in a one-rack-space housing with high reliability and extremely quiet operation. It has been designed to last decades with only nominal maintenance.
The LX II delivers 50 watts per channel into a 4, 8 or 16 ohm load, and provides beautiful harmonic balance, wide open-dynamic delivery and powerful bottom-end response via four Premium matched 6L6GC power tubes, and proprietary paper insulated output transformers. For a dynamic stereo tube power in a compact package, there's simply nothing comparable to this amazing piece of pro-quality gear.
Class AB 50W+50W Stereo Tube Power Amp
Bridged mono for full 100 watts
(4) 6L6GC Premium Matched Power Tubes
(2) 12AX7 Preamp/Phase Inverter Tubes
Selectable Impedance (4/8/16 Ohm)
Single Volume Control (Adjusts both channels simultaneously)
Presence switch with internal trim pot
Depth switch with internal trim pot
Remote Presence and Depth switching control port
Line Level Outputs on each channel
Super-quiet multi-speed cooling fan
Independent channel standby
100% analog signal path
Dimensions: 17.5” (44) (Front Panel 19” W including rack ears) W x 1.75” (4.4) H x 12.5” (32) D;